You will be able to enter into recovery and the firmware will be flashed automatically. Just upload firmware image on (Micro) SD Card and put it in your device. The easiest way to solve this, without need of short circuit of the NAND pins, is to use Amlogic Bootcard Maker to make a bootable micro SD card with your device stock firmware. Then you choose update zip file previously downloaded on usb drive and system start uploading, checking and installing firmware. System let you choose sd card or usb drive. In recovery menu choose option “update from ext”Ĥ. Hold recovery button and turn on the deviceģ. Insert usb flash drive with OTA update package in BoxĢ. Do not power off device during installing.ġ. Then press update: device reboot and start installing firmware. In “Local update” menu press “select” button and choose the update zip file:ĥ. Start device, run settings, then about:Ĥ. Then place downloaded file on flash card or usb flash drive. Download the archive with firmware in zip format.
OTA FIRMWARE UPGRADE (can be different on NON Ugoos devices)ġ. After reflashing device you should see “result: burning successful” message and disconnect device from host PC. If it has not happened, you should check amlogic drivers in device manager and repeat it’s installing.Ĩ. When PC detects device, reflashing starts automatically. Connect device to PC via otg usb using usb A type cable. Open firmware file (File-Import Image) and press start.Ħ. Run and Change to English language in menuĥ. During installation, you should allow to install additional drivers for amlogic devices detection.Ĥ. In directory, you can find firmware file “img” and USB_Burning_Tool_v2.0.5.15.ģ. You should be sure, that using current firmware fits for your device otherwise it could cause harmful consequences.Ģ. You need to download the firmware archive. USB Burning tool is common firmware for Amlogic SoCġ. Here is the video showing main steps of reflashin process:
If you download full firmware (zip file contains img file this guide and usb burning tool) please read following instructions. If you download OTA zip package there are two ways how update your device: via Android (list below main firmware guide) or via recovery.
0 kommentar(er)
